簡介
PCIe-PoE is designed with state-of-the-art Intel® I350 Gigabit Ethernet controller. This server-grade GigE controller incorporates advanced features, such as checksum offloading, segmentation offloading and intelligent interrupt generation/moderation, to increase overall Ethernet performance and reduce CPU utilization. In addition, its single-bus, multi-port topology minimizes the compatibility issue with off-the-shelf motherboards when installing multiple cards.
Machine vision applications can be benefited by PCIe-PoE’s server-grade network performance. Its 25.5W PoE+ can now power PTZ (pan-tilt-zoom) cameras for surveillance applications. PCIe-PoE presents the best cost/performance ratio for your Power over Ethernet solution.
特色
- x4, Gen2 PCI Express interface offering 2GB/s total bandwidth
- Intel® I350 server-grade Gigabit Ethernet controller
- Supports four (I) or two (II) independent GigE Ports
- Compliant with IEEE 802.3at to deliver 25.5 W each port
- Supports 9.5 kB jumbo frame, teaming and IEEE 1588
- Per-port PoE+ power on/off control
規格
| |
PCIe-PoE I |
PCIe-PoE II |
| Bus Interface |
x4, Gen2 PCI Express |
x4, Gen2 PCI Express |
| Gigabit Ethernet Port |
4x GigE ports by Intel® 1350-AM4 controller, supporting 9.5KB jumbo frame, teaming and IEEE 1588 |
2x GigE ports by Intel® 1350-AM2 controller, supporting 9.5KB jumbo frame, teaming and IEEE 1588 |
| PoE Capability |
In compliant with IEEE 802.3at-2009(PoE+), each port delivers up to 25.5 W of power |
In compliant with IEEE 802.3at-2009(PoE+), each port delivers up to 25.5 W of power |
| Cable Requirement |
CAT-5e or CAT-6 cable, 100 meters maximal |
CAT-5e or CAT-6 cable, 100 meters maximal |
| Power Requirement |
Maximal 1.2 A @ 3.3 V from PCI Express bus
Maximal 9.6 A @ 12 V from PCI Express bus
or on-board 4-pin power connector |
Maximal 0.9 A @ 3.3 V from PCI Express bus
Maximal 4.8 A @ 12 V from PCI Express bus |
| Operating Temperature |
0°C ~ 55°C with air flow |
0°C ~ 55°C with air flow |
| Dimension |
167.7 mm (W) x 111.2 mm (H) |
167.7 mm (W) x 111.2 mm (H) |
| NOTE |
It is designed to obtain 12 VDC for PoE devices from either PCI Express bus or on-board 4-pin power connector according to a user-configurable jumper. |
It is designed to obtained 12 VDC for PoE devices directly from PCI Express bus. No external 12 VDC is needed. |
|
